Tried and true, the CL-series hasn't changed much since it was launched in 1970. The simple design delivers exceptional performance in a compact, affordable package. CL-series filters are available in 2" diameter and 6" and 10" lengths.
Request Information Search by Specification
Unit of Measure
Items
CL-Series Inline Water Filters (CL10ROT/28)

CL-Series 2 X 10" granular activated carbon
CL-Series Inline Water Filters (CL10ROT/28)

CL-Series 2 X 10" granular activated carbon
CL-Series Inline Water Filters (CL10ROT/28)

CL-Series 2 X 10" granular activated carbon
CL-Series Inline Water Filters (CL10ROT/28)

CL-Series 2 X 10" granular activated carbon
CL-Series Inline Water Filters (CL6ROT/28)

CL-Series 2 X 6" granular activated carbon
Description N/A 2" by 10" inline granular activated carbon water filter. N/A 2" by 10" inline granular activated carbon water filter. N/A 2" by 10" inline granular activated carbon water filter. N/A 2" by 10" inline granular activated carbon water filter. (20 x 50) N/A 2" by 6" inline granular activated carbon water filter.
Flow Rate N/A 0.5 gpm
Maximum Operating Pressure N/A 125 psig
Operating Temperature N/A 2 to 38 ºC35 to 100 ºF
Rated Capacity N/A 1,500 gal/1 Year N/A 1,500 gal/1 Year N/A 1,500 gal/1 Year N/A 1,500 gal/1 Year N/A 1,000 gal/1 Year
Reduction Claim N/A Chlorine, taste, color, and odor reduction
Service Flow Rate N/A
Standards N/A ANSI (American National Standards Institute) NSF (National Sanitation Foundation)
Capacity per 1 Year N/A
Uses N/A Icemakers, Refrigerators, Under-the-counter, Drinking fountains, Beverage Equipment, R.O. Systems, and in Conjunction with Commercial Purification Systems.
ANSI (American National Standards Institute) / NSF (National Sanitation Foundation) International Standards N/A Tested and Certified by NSF International against ANSI / NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I. N/A Tested and Certified by NSF International against ANSI / NSF Standard 42 for Taste and Odor Reduction and Chlorine Reductions Class I. N/A N/A N/A
General Installation / Operation / Maintenance Requirements N/A
  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (1,500 gallons/1 year) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.
 		N/A
  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (1,500 gallons/1 year) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.
 		N/A
  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (1,500 gallons) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.
 		N/A
  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (1,500 gallons) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.
 		N/A
  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (1,000 gallons/1 year) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.
Special Notices N/A
  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
 		N/A
  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
 		N/A
  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
 		N/A
  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
 		N/A
  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Manufacturing Notes N/A
Additional Information N/A Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. And finally, all threaded connections are precision cut by machine with results in the more accurate and repeatable thread possible.

The CL-Series - a tried and true product that remains a vital part of our business and one of the main reasons why OMNIPURE filters are considered the finest disposable inline water filter ever manufactured.

Water filter heads sold separately. 		N/A Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. And finally, all threaded connections are precision cut by machine with results in the more accurate and repeatable thread possible.

The CL-Series - a tried and true product that remains a vital part of our business and one of the main reasons why OMNIPURE filters are considered the finest disposable inline water filter ever manufactured.

Water filter heads sold separately. 		N/A Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. And finally, all threaded connections are precision cut by machine with results in the more accurate and repeatable thread possible.

The CL-Series - a tried and true product that remains a vital part of our business and one of the main reasons why OMNIPURE filters are considered the finest disposable inline water filter ever manufactured.

Water filter heads sold separately. 		N/A Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. And finally, all threaded connections are precision cut by machine with results in the more accurate and repeatable thread possible.

The CL-Series - a tried and true product that remains a vital part of our business and one of the main reasons why OMNIPURE filters are considered the finest disposable inline water filter ever manufactured.

Water filter heads sold separately. 		N/A Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. And finally, all threaded connections are precision cut by machine with results in the more accurate and repeatable thread possible.

The CL-Series - a tried and true product that remains a vital part of our business and one of the main reasons why OMNIPURE filters are considered the finest disposable inline water filter ever manufactured.

Water filter heads sold separately.