Request Information
2" by 10" inline granular activated carbon water filter.
Unit of Measure

Specifications

Flow Rate

 N/A 0.5 gpm

Maximum Operating Pressure

 N/A 125 psig

Operating Temperature

 N/A 2 to 38 ºC35 to 100 ºF

Rated Capacity

 N/A 1,500 gal/1 Year

Reduction Claim

 N/A Chlorine, taste, color, and odor reduction

Standards

 N/A ANSI (American National Standards Institute) NSF (National Sanitation Foundation)

Uses

 N/A Icemakers, Refrigerators, Under-the-counter, Drinking fountains, Beverage Equipment, R.O. Systems, and in Conjunction with Commercial Purification Systems.

ANSI (American National Standards Institute) / NSF (National Sanitation Foundation) International Standards

N/A Tested and Certified by NSF International against ANSI / NSF Standard 42 for Taste and Odor Reduction and Chlorine Reductions Class I.

General Installation / Operation / Maintenance Requirements

N/A

  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (1,500 gallons/1 year) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Special Notices

N/A

  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Additional Information

N/A Furthermore, no glues or binders that may cause contamination are used in the manufacturing process. Instead, components are friction-welded together, producing a reliable, no-leak seal. And finally, all threaded connections are precision cut by machine with results in the more accurate and repeatable thread possible.

The CL-Series - a tried and true product that remains a vital part of our business and one of the main reasons why OMNIPURE filters are considered the finest disposable inline water filter ever manufactured.

Water filter heads sold separately.