Omnipure
Omnipure
1904 Industrial Way
Caldwell, Idaho 83605
E-mail: sales@omnipure.com
Phone: 1-800-398-0833 or 208-454-2597
Fax: 208-454-0026
Print Back
The Q-Series is the ultimate "user friendly" inline filter on the market. Replacement is as easy as unscrewing the filter body from the permanent head and screwing in the replacement. The Q-Series is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. No tools. No drips. No hassles. The Q-Series is available in 2.5" diameter, and in lengths of 6", 8", 10", 12" and 14".
Sizes shown include 10” length only. More Information for all sizes is available by request.
Unit of Measure

Specifications

Flow Rate

 N/A 0.5 gpm

Maximum Operating Pressure

 N/A 125 psig

Operating Temperature

 N/A 2 to 38 ºC35 to 100 ºF

Rated Capacity

 N/A 2,000 gal/1 Year

Reduction Claim

 N/A Chlorine, taste, color, and odor reduction

Flow Capacity

 N/A 2,000 gal

Filter Diameter

 N/A 2.5 in

Available Lengths

 N/A 6 in8 in10 in12 in14 in

Available Thread Size

 N/A 1/8 in1/4 in

Thread Type

 N/A National Pipe Thread (NPT) - Female

Standards

 N/A NSF (National Sanitation Foundation)

Product Type

 N/A Granular Activated Carbon

Filter Head Type

 N/A Non-Valved Valved

General Installation / Operation / Maintenance Requirements

N/A

  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity (2,000 gallons) is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Special Notices

N/A

  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Additional Information

N/A Standard media includes granular activated carbon for taste and odor reduction, polypropylene depth filtration for removal of grit and sediment, and polyphosphate to control lime and scale deposits. Also, a wide variety of specialty and custom media options are available as well as a corresponding RO membrane body for use in reverse osmosis systems. Eliminates taste and odor. Filters out sediment. Protects equipment.

The Q-Series is designed to give our customers a high quality, economically priced alternative to similar products on the market. Our engineering and production expertise enables us to offer both the initial unit and the replacement bodies at a significantly lower price than the competition. The Q-Series is produced with a diameter of 2.5 in and lengths of 6 in, 8 in,10 in, 12 in and 14 in. Quick-Connect 1/4 in fittings are available on this series. Female threads are available in 1/4 in and 3/8 in NPT.

Water filter heads sold separately.