Request Information
The Q-Series is the ultimate "user friendly" inline filter on the market. Replacement is as easy as unscrewing the filter body from the permanent head and screwing in the replacement. The Q-Series is also available with the optional Twist Tap in-head valve system, which automatically turns the supply water off when the body is disconnected from the head. No tools. No drips. No hassles. The Q-Series is available in 2.5" diameter, and in lengths of 6", 8", 10", 12" and 14".
Sizes shown include 10” length only. More Information for all sizes is available by request.
Unit of Measure

Specifications

Flow Rate

 N/A 0.5 gpm

Maximum Operating Pressure

 N/A 125 psig

Operating Temperature

 N/A 2 to 38 ºC35 to 100 ºF

Rated Capacity

 N/A 1,250 gal/1 Year

Reduction Claim

 N/A Lead, cyst, chlorine, taste, color, odor, and VOC reduction

Flow Capacity

 N/A 1,250 gal2,500 gal

Filter Diameter

 N/A 2.5 in

Available Lengths

 N/A 6 in8 in10 in12 in14 in

Available Thread Size

 N/A 1/8 in1/4 in

Thread Type

 N/A National Pipe Thread (NPT) - Female

Filter Size

 N/A 1 µ

Standards

 N/A NSF (National Sanitation Foundation)

Filter Head Type

 N/A Non-Valved Valved

ANSI (American National Standards Institute) / NSF (National Sanitation Foundation) International Standards

N/A System Tested and Certified by NSF International against ANSI / NSF Standard 42 for the reduction of Chlorine Class I and Taste and Odor, and against Standard 53 for the reduction of Lead and Cyst.

General Installation / Operation / Maintenance Requirements

N/A

  • Note flow direction of filter.
  • Flush new cartridge with 5 gallons of water through filter at the rated service flow before use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Special Notices

N/A

  • Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
  • Do not use with water that is micro biologically unsafe or of unknown quality without adequate disinfection before or after the system.

Additional Information

N/A Standard media includes granular activated carbon for taste and odor reduction, polypropylene depth filtration for removal of grit and sediment, and polyphosphate to control lime and scale deposits. Also, a wide variety of specialty and custom media options are available as well as a corresponding RO membrane body for use in reverse osmosis systems. Eliminates taste and odor. Filters out sediment. Protects equipment.

The Q-Series is designed to give our customers a high quality, economically priced alternative to similar products on the market. Our engineering and production expertise enables us to offer both the initial unit and the replacement bodies at a significantly lower price than the competition. The Q-Series is produced with a diameter of 2.5 in and lengths of 6 in, 8 in,10 in, 12 in and 14 in. Quick-Connect 1/4 in fittings are available on this series. Female threads are available in 1/4 in and 3/8 in NPT.

Water filter heads sold separately.