Request Information
  • Taste, odor & chlorine reduction
  • Maximum six-month service life

Sizes shown include 10” length only. More Information for all sizes is available by request.
Unit of Measure

Specifications

Flow Rate

 N/A 0.5 gpm

Maximum Operating Pressure

 N/A 125 psig

Operating Temperature

 N/A 35 to 100 ºF

Rated Capacity

 N/A 2,500 gal (Scale 6 months)

Reduction Claim

 N/A Chlorine, taste, color, and odor reduction with scale/corrosion inhibitor

Service Life

 N/A 2,500 gal

Body Size

 N/A 2.5 x 10 in

Product Type

 N/A 10 Micron Carbon Block with Phosphate

Filter Head Type

 N/A Non-Valved Valved

Test Information

N/A The L-Series filter housings and fillings have been rested for performance under NSF Standard 42. Tests included Hydrostatic Testing at 300 psig and Cycle Testing of 100.000 Repetitions from 1 to 150 psig. Complete test results are available from OMNIPURE. Omnipure products have been tested and listed under Standard 42 for taste, odor and chlorine reduction. or particulate reduction. or have been materials certified. All filters should be installed on cold water lines only.

Manufacturing Notes

N/A Two and one half inch diameter filler bodies.
Activated Carbon Filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or alter the unit.