Request Information
Omnipure Filter Company offers three series of replacement filter elements for use in systems or as stand alone units. They are the OC-Series, the CS Series and the OMB Series.

The OMB Series of replacement cartridges feature the new OmnipureBlock™ media. This high quality carbon block media is manufactured from raw materials to precise specifications entirely at the Omnipure manufacturing facility. Filter elements are available in 10 micron, 5 micron, 1 micron and 1 micron lead reduction formulations. Elements are finished with a single layer of spun-bonded polypropylene netting.
Unit of Measure

Specifications

Flow Rate

 N/A .75 gpm

Maximum Operating Pressure

 N/A 125 psig

Operating Temperature

 N/A 40 to 100 ºF

Rated Capacity

 N/A 10,000 gal

Reduction Claim

 N/A Chlorine, taste, color, and odor reduction

Filter Outer Diameter

 N/A 2.87 in

Filter Length

 N/A 9.75 in

Micron Rating

 N/A 10 µ

Chlorine Reduction

 N/A 10,000 gal and up

Available Replacement Cartridges

N/A Carbon Block Cartridge Replacements

Taste Odor and Chlorine Reduction

 N/A Granular Activated Carbon (GAC) alone or with specialty media

Additional Information

N/A Polypropylene end caps with compression gaskets are standard. Ask your Omnipure representative about custom formulations and alternative finishing options.

Omnipure replacement cartridges are available in our standard granular media combinations as well as carbon block configurations. OMB cartridges (pictured on the other side of this sheet) fit standard 10 in and 20 in housings.

The table that describes each standard media option, its attributes and ordering nomenclature. Custom media options and packaging are available.

Water filter heads sold separately.